Catalytic activity of nanocrystalline ZnM2O4 (M = Fe,Co) prepared via simple and facile synthesis of thermal decomposition of mixed metal complexes of Schiff bases generated from α-ketobutyric acid and diaminoguanidine

Metal complexes ([ML₂], where M = Fe, Co, or Zn; HL = 2-[(6-ethyl-5-oxo-4,5-dihydro-2H-[1,2,4]triazin-3-ylidene)-hydrazono]-butyric acid, C₉H₁₃N₅O₃) of a Schiff base derived from α-ketobutyric acid (α-KBA) and diaminoguanidine (Damgu) were synthesized and characterized using elemental, spectral, and thermal studies. The metal complexes exhibited similar decomposition behavior, with a highly exothermic final decomposition step resulting in the formation of metal oxides. Isomorphism among the complexes was revealed using a powder X-ray diffraction (PXRD) technique. Solid solution precursors ([Zn_1/3M_2/3(L)₂], where M = Fe, Co) were synthesized and characterized using various physico-chemical techniques. A thermal decomposition technique was used to prepare spinel-type zinc cobaltite (ZnCo₂O₄) and zinc ferrite (ZnFe₂O₄) nanocrystalline particles with the synthesized single source precursors. Structural studies using PXRD ascertained the predominant crystal phase to be spinel. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) showed a mean nanoparticle size of 18 ± 2 nm. Magnetic measurements revealed a weak magnetic behavior in the synthesized spinels. In the aqueous phase, the spinels exhibited catalytic activity, reducing 4-nitrophenol (4-NP) in the presence of NaBH₄ at room temperature. Additionally, the study demonstrated that the catalyst can be recovered and reused for five cycles with a more than 85% conversion efficiency.     

Tips and Tricks for the Surface Engineering of Well-Ordered Morphologically Driven Silver-Based Nanomaterials

Particularly-shaped silver nanostructures are successfully applied in many scientific fields, such as nanotechnology, catalysis, (nano)engineering, optoelectronics, and sensing. In recent years, the production of shape-controlled silver-based nanostructures and the knowledge around this topic has grown significantly. Hence, on the basis of the most recent results reported in the literature, a critical analysis around the driving forces behind the synthesis of such nanostructures are proposed herein, pointing out the important role of surface-regulating agents in driving crystalline growth by favoring (or opposing) development along specific directions. Additionally, growth mechanisms of the different morphologies considered here are discussed in depth, and critical points highlighted.     

Growth and characterization of two-dimensional crystals for communication and energy applications

This review article covers the growth and characterization of two-dimensional (2D) crystals of transition metal chalcogenides, h-BN, graphene, etc. The chemical vapor transport method for bulk single crystal growth is discussed in detail. Top-down methods like mechanical and liquid exfoliation and bottom-up methods like chemical vapor deposition and molecular beam epitaxy for mono/few-layer growth are described. The optimal characterization techniques such as optical, atomic force, scanning electron, and Raman spectroscopy for identification of mono/few-layer(s) of the 2D crystals are discussed. In addition, a survey was done for the application of 2D crystals for both creation and deterministic transfer of single-photon sources and photovoltaic systems. Finally, the application of plasmonic nanoantenna was proposed for enhanced solar-to-electrical energy conversion and faster/brighter quantum communication devices.     

In-chain functionalization through the combination of ring opening copolymerization and oxime “Click” reaction towards X-ray opaque polylactide copolymers

X-ray imaging functionalization of biodegradable polyesters is a great demand and challenge in biomedical applications.In this work,a strategy of in-chain functionalization through the combination of ring opening copolymerization and oxime "Click" postfunctionalization was developed towards X-ray opaque polylactide copolymers.A functionalized cyclic carbonate was first synthesized and used as comonomer of polylactide copolymers,which were subjected to postfunctionalization of oxime "Click" reaction towards iodinated polylactide copolymers.The chemical structure and physical properties of the target products were traced and confirmed.In vitro cytotoxicity evaluation with 3T3-Swiss albino by Alamar blue demonstrated a low cytotoxicity.The X-ray radiopacity was analyzed by Micro-CT and quantified by Hounsfield Units value,which could be tailorable by the feedstock.It is a promising X-ray visible implantable biomaterial in biomedical applications.     

MALDI MSI Reveals the Spatial Distribution of Protein Markers in Tracheobronchial Lymph Nodes and Lung of Pigs after Respiratory Infection

Respiratory infections are a real threat for humans, and therefore the pig model is of interest for studies. As one of a case for studies, Actinobacillus pleuropneumoniae (APP) caused infections and still worries many pig breeders around the world. To better understand the influence of pathogenic effect of APP on a respiratory system—lungs and tracheobronchial lymph nodes (TBLN), we aimed to employ matrix-assisted laser desorption/ionization time-of-flight mass spectrometry imaging (MALDI-TOF MSI). In this study, six pigs were intranasally infected by APP and two were used as non-infected control, and 48 cryosections have been obtained. MALDI-TOF MSI and immunohistochemistry (IHC) were used to study spatial distribution of infectious markers, especially interleukins, in cryosections of porcine tissues of lungs (necrotic area, marginal zone) and tracheobronchial lymph nodes (TBLN) from pigs infected by APP. CD163, interleukin 1β (IL-1β) and a protegrin-4 precursor were successfully detected based on their tryptic fragments. CD163 and IL-1β were confirmed also by IHC. The protegrin-4 precursor was identified by MALDI-TOF/TOF directly on the tissue cryosections. CD163, IL-1β and protegrin-4 precursor were all significantly (p < 0.001) more expressed in necrotic areas of lungs infected by APP than in marginal zone, TBLN and in control lungs.     

新型表面活性剂的合成与表征综合实验设计

将专业综合实验与科研成果相结合,设计了新型表面活性剂的合成与表征综合化学实验。实验涉及含羟基基团的表面活性剂的合成、纯化、结构表征和性能测定等操作。该综合实验将有机化学基础知识、表面活性剂的基本性质与前沿科学研究相结合,从而实现学生实验技能的提升、认知视野的拓展和综合能力培养的目标。     

氧离子传导型固体氧化物电解池燃料电极的研究进展

固体氧化物电解池可高效地电解H₂O/CO₂制备燃料,越来越受到人们的重视. 本文对近年来在燃料电极（阴极）材料方面的研究进展进行了全面综述,指出各种阴极材料的优缺点及发展趋势,强调亟待解决的关键科学与技术问题.     

Optical Trapping with Focused Surface Waves

Near-field optical trapping can be realized with focused evanescent waves that are excited at the water–glass interface due to the total internal reflection, or with focused plasmonic waves excited on the water–gold interface. Herein, the performance of these two kinds of near-field optical trapping techniques is compared using the same optical microscope configuration. Experimental results show that only a single-micron polystyrene bead can be trapped by the focused evanescent waves, whereas many beads are simultaneously attracted to the center of the excited region by focused plasmonic waves. This difference in trapping behavior is analyzed from the electric field intensity distributions of these two kinds of focused surface waves and the difference in trapping behavior is attributed to photothermal effects due to the light absorption by the gold film.     

Recent Advances in Spatial Self-Phase Modulation with 2D Materials and its Applications

In recent years, spatial self-phase modulation (SSPM) with two-dimensional (2D) materials has attracted the attention of many researchers as an emerging and ubiquitous nonlinear optical effect. In this review, the state of the art of 2D material-based SSPM is summarized. SSPM measures or tunes the nonlinearity of 2D materials, and it is also an effective approach to study the band structure of 2D materials. Several modified forms of SSPM, such as high-order, white-light-excited, vector field excited, and optically nonlinearly enhanced SSPM are also presented. Subsequently, the physical origin of the SSPM formation mechanism is compared and analyzed. Furthermore, the applications of SSPM with 2D materials, including passive photonic devices, generation of Bessel beams, and identifying the mode of the orbital angular momentum, are listed. Finally, several urgent problems of the SSPM with 2D materials, potential applications, and prospects for future development are presented.